With Both Hands

Sign in Subscribe

DIY

Laundry Pedestal

The Magistra decided she wanted to built something in the week in between Christmas and New Years, so we so we built this:

Ana White Laundry Pedestal

http://ana-white.com/2011/01/sausha's-washerdryer-pedestals

The plans were pretty easy to follow, and it cost us about $150 all told, but we did have some things on hand, like paint.

Molding	$16.00
4x4	$7.52
2x4	$18.30
3/4” MDF	$68.84
Wood filler	$8.99
3d finish nails	$3.47
Square	$3.97
Angle bracket	$2.60
2” screws	$7.98
3” screws	$7.97
Total	$145.64

Read next

DIY Swing Set from Timber and Swing-N-Slide Brackets

It has been a while since I’ve done a DIY post. However, I was motivated to do one for this project as I felt I learned a few things the hard way and I wanted to share. Seven years ago, I wanted a swing set and a playhouse for

How to turn a Vintage Zenith Radio Cabinet into a Lighted Bar Part 5: Door and Electronics

Hanging the Door The original plan for hanging the door was to use a piano hinge. This seemed like a good idea at the time, but I had a heck of a time getting the swing of the door right. I think I ended up getting a couple of holes

How to turn a Vintage Zenith Radio Cabinet into a Lighted Bar Part 4: Refinishing

Refinishing This is a guest post written by my wife. She is far better than me at detail work, so here is her account. Painting the Inside I started the refinishing work by painting the inside of the cabinet. Because the wood on the interior of the cabinet was never

Comments ()